My Car Computer
**** Click on any picture to see a larger version ****
Version 3 (The quest to go faster)
Page 2 (Install Pictures)
The new car
Stock Interior
Start of install Framing all done Wires and cables attached
Trunk install completed except for cover Case with Gamma 28 fans installed Starting cover for case
Holes and signal cut out Case lit up With cover on at night
In the day time With the top cover on Showing buttons to turn lights on
400 w Pioneer amp Finished cover with inverter moved
under amp
This is what I cut off of monitor Lilliput frame epoxied in Back Side epoxied in
Direction of ribbon cables to help with reconnecting correctly Monitor being installed in bezel
Back of switches , and board PCB board attached Board mounted in bezel
(used cd rom blank for the support (notice mother board stands
piece) for spacing and support)
These worked great, another of my
better designs. Attached one to each
corner and the connected all four Here are my adapters connected,
together with one big zip tie and the board in place This is the setup from the side
The back side Close up showing zip ties connected The finished product
XP up and running My main screen (MediaCar) The audio player
Picture of system with Radiator running Another shot
Starting on DVD CDRW Install Back Side From the underside
into lower dash
Back side w/ IDE/USB adapter Front view with fiberglass cover Bottom side showing arrangement
made and USB 2.0 plug installed
Top part attached to lower part Back side Installing back in car
All finished except for repainting face of DVD player to match
Finished Shots (no it will never really be finished, always something to change)
Bat Mobile in the Batcave, Yes Finished interior install Trunk completed, no lost space
the Bat Signal is painted on the wall !
Finished inside shot (other than painting DVD cover)
with FrodoPlayer running
See ya,
Page was last updated 12/31/2005 02:04:12 PM
You are Visitor Number: